Lesson 4: Understanding Ohm’s Law
Ohm’s law practice for beginners: V = I × R, the Ohm’s law triangle, unit conversions, a calculator and 11 practice questions with step-by-step solutions.
Builds on Lesson 3: Voltage, Current and Resistance
In this lesson you’ll learn
- What Ohm’s law says
- V = I × R and its rearrangements
- Using the Ohm’s law triangle
- Converting mA, kΩ and other units
- Solving circuit calculations step by step
- Choosing a resistor value for a circuit
Lesson summary
- Ohm’s law: for a resistor at a steady temperature, current is proportional to voltage. V = I × R.
- Rearranged: I = V ÷ R and R = V ÷ I. The triangle (V on top, I × R below) helps you remember.
- Convert to volts, amps and ohms before calculating: 1 mA = 0.001 A, 1 kΩ = 1000 Ω.
- Write the formula, substitute the values with units, then calculate.
- Adding resistance to a circuit reduces the current, which is how a simple dimmer works.
- To limit a current, choose R = V ÷ I.
Lesson notes: Understanding Ohm’s Law
A written version of this lesson. The hands-on simulators are in the lesson itself.
Current is proportional to voltage
In 1827 Georg Ohm found that, for a metal conductor at a steady temperature, the current through it is proportional to the voltage across it.
Pick a resistance and slide the voltage. Each resistance gives a straight line.
Key idea: Ohm’s law: V = I × R. Voltage equals current multiplied by resistance.
The Ohm’s law triangle
One formula, three arrangements. The triangle shows them all: V on top, I × R below.
Cover the quantity you want to find. What’s left shows how to calculate it.
Key idea: V = I × R, I = V ÷ R, R = V ÷ I.
Units and conversions
Real circuits often use milliamps (mA) and kilohms (kΩ). The formula only works in volts, amps and ohms.
Key idea: mA → A: divide by 1000. kΩ → Ω: multiply by 1000.
An Ohm’s law calculator
Choose what to find, then enter the two values you know. The calculator shows every step, including unit conversions.
Key idea: Three steps every time: write the formula, substitute the values with units, calculate.
Changing resistance changes current
Older car dashboards dimmed their lights with a variable resistor (a rheostat) in the lamp circuit.
Add resistance with the slider and watch the current and the lamp.
Key idea: More resistance in the circuit means less current, so the lamp gets less power and dims. (The resistor gets warm: it wastes the power the lamp doesn’t use, which is why modern dimmers use electronics instead.)
Worked examples
A current of 250 mA is flowing. What is that in amps?
1 mA = 0.001 A250 mA ÷ 1000 = 0.25 A
Current 2 A, resistance 6 Ω. Find the voltage.
V = I × RV = 2 A × 6 ΩV = 12 V
Voltage 12 V, resistance 3 Ω. Find the current.
I = V ÷ RI = 12 V ÷ 3 ΩI = 4 A
Voltage 24 V, current 2 A. Find the resistance.
R = V ÷ IR = 24 V ÷ 2 AR = 12 Ω
Voltage 9 V, resistance 4.5 Ω. Find the current.
I = V ÷ RI = 9 V ÷ 4.5 ΩI = 2 A
Current 0.5 A, resistance 24 Ω. Find the voltage.
V = I × RV = 0.5 A × 24 ΩV = 12 V
A 12 V supply drives 0.4 A through a heater. What is its resistance?
R = V ÷ IR = 12 V ÷ 0.4 AR = 30 Ω
20 mA flows through a 450 Ω resistor. What is the voltage across it?
Convert: 20 mA = 0.02 AV = I × R = 0.02 A × 450 ΩV = 9 V
5 V across a 2.2 kΩ resistor. What current flows, in milliamps?
Convert: 2.2 kΩ = 2200 ΩI = V ÷ R = 5 V ÷ 2200 Ω = 0.00227 A0.00227 A × 1000 = 2.27 mA
A 24 V circuit draws 150 mA. What is its total resistance?
Convert: 150 mA = 0.15 AR = V ÷ I = 24 V ÷ 0.15 AR = 160 Ω
8 mA flows through a 1.5 kΩ resistor. What is the voltage across it?
Convert: 8 mA = 0.008 A and 1.5 kΩ = 1500 ΩV = I × R = 0.008 A × 1500 ΩV = 12 V
A lamp draws 3 A from 12 V. The supply drops to 10.8 V. Treating the lamp’s resistance as fixed, what current flows now?
Find R first: R = V ÷ I = 12 V ÷ 3 A = 4 ΩNew current: I = V ÷ R = 10.8 V ÷ 4 ΩI = 2.7 A
No experience needed. Answer as you go; you can always try again.