Lesson 3: Voltage, Current and Resistance
What resistance is and how voltage, current and resistance work together. Set the voltage and resistance in an interactive circuit and watch the current change.
Builds on Lesson 2: Understanding Voltage and Current
In this lesson you’ll learn
- What voltage, current and resistance each mean
- What resistance is and what affects it
- How changing voltage or resistance changes current
- Calculating current with I = V ÷ R
- Volts, amps and ohms
- Conventional current: + to −
Lesson summary
- Voltage (V, in volts) is the push: the potential difference that drives charge around a circuit.
- Current (I, in amps) is the flow: the amount of charge passing a point each second.
- Resistance (R, in ohms, Ω) is the opposition to current. It depends on material, length, thickness and temperature.
- More voltage → more current. More resistance → less current.
- Current = voltage ÷ resistance: I = V ÷ R.
- Conventional current flows from + through the circuit to −.
Lesson notes: Voltage, Current and Resistance
A written version of this lesson. The hands-on simulators are in the lesson itself.
Every circuit has three key quantities
You’ve met voltage and current. The third quantity is resistance.
Together they explain what happens in every circuit, from a torch to a car’s headlights.
Key idea: Voltage pushes, current flows, resistance opposes.
Resistance opposes current
A resistor is a component made to have a set resistance. Here the battery is fixed at 12 V.
Drag the resistance slider and watch the current and the moving dots.
Key idea: With the same voltage, more resistance means less current. Less resistance means more current.
Voltage drives current
Now the resistance is fixed at 6 Ω. Slide the battery voltage between 1 V and 24 V.
Current flows from + around the circuit to −: conventional current, the direction the dots move.
Key idea: With the same resistance, more voltage means more current. Doubling the voltage doubles the current.
Even wires have resistance
A wire’s resistance depends on its material, its length and its thickness.
Try a longer wire, then a thicker one, then switch materials.
Key idea: Longer wire → more resistance. Thicker wire → less resistance. Resistance also rises as most metals get hotter. Wiring is made thick enough that its resistance stays very small.
High and low voltage, high and low resistance
Four circuits, each calculated by the simulator. Compare the currents.
Key idea: Current goes up with voltage and down with resistance. That relationship is written I = V ÷ R.
The formula: I = V ÷ R
To find the current, divide the voltage by the resistance.
- Write the formula: I = V ÷ R
- Put in the values: I = 12 V ÷ 4 Ω
- Work it out: I = 3 A
Always keep the units: volts ÷ ohms gives amps.
Key idea: I = V ÷ R. Current in amps, voltage in volts, resistance in ohms.
Resistance in the real world
- Car headlight bulb (55 W): about 2.6 Ω when hot, so it draws roughly 4.6 A from 12 V.
- Interior light bulb (5 W): about 29 Ω when hot, drawing about 0.4 A.
- Heating elements use high-resistance wire such as nichrome, so electrical energy becomes heat.
- Cable insulation has an enormous resistance, so current stays inside the copper.
Key idea: At the same voltage, a device that draws more current has a lower resistance. Lamp filaments have far less resistance when cold, so these figures are for a lit bulb.
Why voltage matters for safety
Your body has resistance too. A higher voltage can push a larger, more dangerous current through it, which is why mains electricity (230 V or 120 V AC) is so much more dangerous than a 12 V battery.
This lesson’s simulator is a low-voltage DC learning model. It is not a tool for designing or testing mains installations.
Key idea: Low voltage isn’t automatically safe: a 12 V car battery can still deliver hundreds of amps into a short circuit, enough to melt wires and cause fires or burns.
Worked examples
A 12 V battery is connected across a 6 Ω resistor. What current flows?
I = V ÷ RI = 12 V ÷ 6 ΩI = 2 A
A 9 V battery is connected across an 18 Ω resistor. What current flows?
I = V ÷ RI = 9 V ÷ 18 ΩI = 0.5 A
No experience needed. Answer as you go; you can always try again.