Lesson 2: Understanding Voltage and Current
Voltage and current explained for beginners: potential difference, volts, amperes and conventional current, with interactive diagrams and a circuit simulator.
Builds on Lesson 1: Build Your First Circuit
In this lesson you’ll learn
- What voltage is
- What electric current is
- How voltage and current differ
- Volts (V) measure voltage
- Amperes (A) measure current
- Conventional current: + to −
Lesson summary
- Voltage is a potential difference: the difference in electric potential between two points. 1 V = 1 joule per coulomb.
- Voltage is measured between two points, in volts (V), with a voltmeter.
- Current is the rate of flow of electric charge. 1 ampere (A) = 1 coulomb per second.
- Voltage and current are different: voltage drives the current. You can have voltage with no current, like an open switch.
- For the same bulb, a bigger voltage drives a bigger current.
- Conventional current flows from + to −. Electrons drift the other way, from − to +.
Lesson notes: Understanding Voltage and Current
A written version of this lesson. The hands-on simulators are in the lesson itself.
Voltage is a potential difference
A battery gives its + terminal a higher electric potential than its − terminal.
The difference between the two is the battery’s voltage. Slide it from 1 V to 24 V and watch the potential levels.
Key idea: Voltage tells you how much energy each unit of charge gains or gives up between two points: 1 volt = 1 joule per coulomb.
A voltmeter measures between two points
A voltmeter has two probes. It reads the potential difference across whatever lies between them.
Tap two lettered points to place the probes. Then try opening the switch and measuring across it (B and C).
Key idea: Voltage is measured across a component or between two points. Its unit is the volt (V).
Current is the rate of flow of charge
Current tells you how much electric charge passes a point each second. Charge is measured in coulombs (C).
Pick a current and watch how quickly charge builds up at the checkpoint.
Key idea: 1 ampere (A) = 1 coulomb of charge passing a point every second. (1 coulomb is about 6 billion billion electrons.)
Which way does current flow?
By agreement, conventional current flows from + around the circuit to −.
In metal wires the moving charges are actually electrons, which are negative, so they drift the opposite way. Switch between the two views.
Key idea: Both views describe the same current. Circuit diagrams, meters and this course use conventional current: + to −.
Voltage and current are not the same thing
They’re linked, but they describe different things:
Key idea: You can have voltage without current, like an open switch or a battery on a shelf. But a steady current needs a voltage to drive it.
Test your prediction
The lab starts at 6 V. Note the current, then slide to 12 V. Then try 24 V.
Key idea: For the same bulb, more voltage drives more current. Here the bulb is a fixed 12 Ω, so I = V ÷ 12 Ω. Real bulb filaments get more resistant as they heat up, so real currents rise a little less.
No experience needed. Answer as you go; you can always try again.